If interested, would you please leave your company contact information, not for personal. Thanks!
Mac X-code 實驗室-4"~12" 製程工程師
- Apr 24 Sun 2011 05:03
CN 101816270A - 農業大棚 -License
- Apr 13 Wed 2011 20:24
出痧 與 刮痧 ~ learn from 陳潮宗/中華民國中醫師公會全國聯合會常務理事 聯合報 100.4.13
- Apr 13 Wed 2011 15:00
胃液 與 熱湯 ~ 中藥 藥湯與藥粉
From Encyclopedia of Human Disease Diagram by Mitsuo Hattori and Okajima , at Page 162,
胃的構造和功能 ~ 胃液是無色透明, 帶有些微黏性的酸性液體, 胃液的成份幾乎都是水, ㄧ天的分泌量約為 1.5 liter. 如果我們馬上喝下 500c 的熱湯, is good or bad? 是否 香港人的養生之道 是 空腹時 喝熱湯是可用實驗證明其有效性. ㄧ碗 500cc 的熱湯, 可馬上 dilute 胃酸嗎?是否可增加 維生素的吸收? 中藥的 藥湯 是比 藥粉有效的.
- Apr 12 Tue 2011 21:40
普服芬膜衣錠 (Purfen 400mg) - 4"~12"製程工程師-小女人幫-化學課
經痛 醫師開的藥 ~ i just google it, and found it is very interesting. Look likes, it helps me to relief from every kind of pain.
Purfen之藥理作用:http://www.urocare.com.tw/newpage7b.htm
- Apr 11 Mon 2011 23:13
Cytotec 喜克潰 Misoprostol
Cytotec is for 治療胃及十二指腸潰瘍,促進子宮收縮
so surprised. ㄧ種藥可同時治胃 十二指腸潰瘍 與 引產. 我認為 應該是 "胃與子宮都是 袋狀中空" pls see 人體疾病圖解大百科 ~服部光男 , 剛島重孝 總監修 page.164
- Apr 06 Wed 2011 11:43
Physical Metallurgy Principles Cp 9 Solid Solutions vs Human Bodies
First, thanks 清華 葉均蔚 教授 's 完美講義.
Solid Solutions-Solvent - 1) Substitutional Solid Solutions 2) Interstitial Solid Solution
- Apr 06 Wed 2011 03:38
Holtek (Utek) 5" fab Equipment Engineer ( EE)
First, I need to thank all Equipment Engineers who worked with me when I was in Holtek 5" fab from 1995 to 1999. In 8" fab, 應該 沒人 能像你們 能自己焊機台的電路板, 燒EPROM, 切零件, 自己清 BOE 槽. 聽說 茂x, x德 都只會打電話. i miss all you guys. 尤其是 林x偉. 沒有他 每次都幫我修機,快且修的好, 不囉唆, 不然 我的日子不知該如何過.
Remember, ㄧ起 蹲 在無塵室 修機的往事, tel 580 的機台真棒,永遠不會壞, lam4420 4520i 9600和 amat 8330 ㄧ定 固定都會 down. Matrix 303 實在太划算且好顧的機台.nikon 的microscope 實在太棒了, robot 會把wafer 360度的轉, 且從來不會撞片, 等我有錢時,想買ㄧ台放家裡.
- Apr 05 Tue 2011 09:43
藥理學-Pharmaceutical Care Research Institute 所長 藥學博士 中原 保裕 主任研究員 藥劑師 中原 さとみ 著 ~reading report 1
at page 14, How the medicine works?
1. To the celluar - 細胞膜有載體 (carrier) , all chemical can use carrier to go inside the celluar.
- Apr 05 Tue 2011 09:12
Thermodynamic-Zeroth, First, Second and Third Laws
- Apr 05 Tue 2011 08:50
Al-Si-Cu vs Human Blood
Just remebered, when i was processing 5" Si wafer on 1996, we were using Al-1%Si-0.5%Cu. But on the street of wafer, sometimes, there were Si residue. When we cut the crosssection on street ( before Metal etch), Al-Si-Cu/Si wafer, comparing 1% Si and 100% Si, 99% Al and 0 % Al, 0.5% Cu and 0% Cu, here comes "diffusion" for Al, Cu and Cu at high temperature. When we use chemical metal etch, the etch solution can not etch away Si, then, Si residues remains on the wafer. Those are very interesting things happen on the wafer.
However, when we think about our blood, our blood also have several doping materials, we can not just easily treat our blood as " Pass"or " Scrap". If our blood has residue, what can we do? flush away? use chemical to clean? or just leave or ignore these residues there. At least, we need a "clean blood" in our body.